TUTORIALS

MODELLING GROUNDWORK
	Epoxy putty is used to position and set the figures onto the base.
	When cured, a second layer of epoxy putty is applied in dollops to build up the land form.
	A palette knife is used to spread the putty
	Terrain could be formed by hand. Latex gloves were worn to prevent any finger prints from registering onto the putty.
	Rocks are represented with crushed charcoal embedded into the putty.
	Fine roots are introduced to create the embedded roots.
	A thick layer of white glue is applied with a palette knife to secure the elements.
	A generous amount of fine gravel and dirt are sprinkled over the white glue.
	A dry sponge is used to gently press over the dirt and gravel so that it adheres better and conforms to the terrain.
	Dried roots are applied over to represent exposed roots.
	A dry sponge is used to adhere the roots to the terrain.
	The keys for the figure's feet are cleaned with a wet brush.
	Small amount of static grass is sprinkled over the terrain before the glue completely sets. This is to soften the boundary between the grass and the soil.
	Grass mat is affixed to the terrain with white glue and a pair of tweezers.
	Figures are re-positioned into the groundwork.
	The masking tape is removed and all irregularities are cleaned up with a wet sponge before the epoxy putty sets.
	The completed groundwork ready for painting.